Pro-Built Tools PB1200 Series Installationshandbuch PDF herunterladen (Seite 17)

GTO 4000XL Instruction Manual © 091610 7

Step 1:

Close the gate and place your level

against the horizontal cross member.

Position the level so that the top should

be in the center of the cross member

and overlaps the post. Scribe a line

across the cross member and post.

You will use this line to help determine

position of post and gate brackets.

Step 2:

Position the post bracket on the post with the mounting holes

centered over the scribe line. The post bracket should be

ushwiththeedgeofthepostclosesttothegate.Markthe

position of post bracket holes on the post.

Step 3:

Drill holes through post as marked using a

/8” drill bit. Install

the post bracket using the

/8” x 8” hex head bolts and

/8”at

washers, lock washers, and nuts (provided) .

Step 4:

Place the end of post pivot bracket with two holes inside the

post bracket. (Notched end of Post Pivot Bracket should face

gate, to accommodate the operator arm.) Align the back hole

in the post pivot bracket with back hole in the post bracket.

Insert

/8” x 3” hex head bolt and washer through post pivot

bracket and post bracket and secure with

/8” washer, lock

washer and nut.

Metal reinforcement plate

for wood post

3/8" x 3" Bolt

Post Pivot Bracket

Post Bracket

3/8" Nut

3/8" Lock Washer

3/8" Washer

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Keine Kommentare

Pro-Built Tools PB1200 Series Installationshandbuch Seite 17